Thrust Ball Bearings-China Ball Bearing Manufacturer and Suppliers

rolling bearings

thrust ball bearings

Thrust ball bearings are separable bearings. The single-acting thrust ball bearing consists of a shaft washer, a housing washer and a ball set with cage. The double-acting type consists of a shaft washer (centre washer), two housing washers and two ball sets with cages. Thrust ball bearings can be applied for high axial loads and low to medium speeds. However, they cannot take radial loads. They are sensitive to angular deflection and characterized by extremely rigid guidance in axial direction. Depending on speed, a minimum load is necessary to avoid sliding movements of the ball set, which are caused by centrifugal forces.

Versions of thrust ball bearings

single-direction

Flat seat face:511,512,513,514 series
Spherical seat face:532,533,534 series
Aligning seat washer:532…U,533…U,534…U series
Brass,nylon,steel cage

double-direction

Flat seat face:522,523,524 series
Spherical seat face:542,543,544 series
Aligning seat washer:542…U,543…U,544…U series
Brass,nylon,steel cage

Miniature series

Single-direction thrust ball bearings

d	D	T	T1	T2	flat seat face	spherical seat face	aligning seat washer
10	24	9	—	—	51100	—
	26	11	11.6	13	51200	53200	53200U
12	26	9	—	—	51101
	28	11	11.4	13	51201	53201	53201U
15	28	9			51102
	32	12	13.3	15	51202	53202	53202U
17	30	9	—	—	51103
	35	12	13.2	15	51203	53203	53203U
20	35	10	—	—	51104
	40	14	14.7	17	51204	53204	53204U
25	42	11	—	—	51105
	47	15	16.7	19	51205	53205	53205U
	52	18	19.8	22	51305	53305	53305U
	60	24	26.4	29	51405	53405	53405U
30	47	11	—	—	51106
	52	16	17.8	20	51206	53206	53206U
	60	21	22.6	25	51306	53306	53306U
	70	28	30.1	33	51406	53406	53406U
35	52	12	—	—	51107
	62	18	19.9	22	51207	53207	53207U
	68	24	25.6	28	51307	53307	53307U
	80	32	34	37	51407	53407	53407U
40	60	13	—	—	51108
	68	19	20.3	23	51208	53208	53208U
	78	26	28.5	31	51308	53308	53308U
40	90	36	38.2	42	51408	53408	53408U
45	65	14	—	—	51109
	73	20	21.3	24	51209	53209	53209U
	85	28	30.1	33	51309	53309	53309U
	100	39	42.4	46	51409	53409	53409U
50	70	14	—	—	51110
	78	22	23.5	26	51210	53210	53210U
	95	31	34.3	37	51310	53310	53310U
	110	43	45.6	50	51410	53410	53410U
55	78	16	—	—	51111
	90	25	27.3	30	51211	53211	53211U
	105	35	39.3	42	51311	53311	53311U
	120	48	50.5	55	51411	53411	53411U
60	85	17	—	—	51112	53212	53212U
	95	26	28	31	51212	53312	53312U
	110	35	38.3	42	51312	53412	53412U
	130	51	54	58	51412
65	90	18	—	—	51113	53213	53213U
	100	27	28.7	32	51213	53313	53313U
	115	36	39.4	43	51313	53413	53413U
	140	56	60.2	65	51413
70	95	18	—	—	51114	53214	53214U
	105	27	28.8	32	51214	53314	53314U
	125	40	44.2	48	51314	53414	53414U
	150	60	63.6	69	51414
75	100	19	—	—	51115
	110	27	28.3	32	51215	53215	53215U
	135	44	48.1	52	51315	53315	53315U
	160	65	69	75	51415	53415	53415U
80	105	19	—	—	51116
	115	28	29.5	33	51216	53216	53216U
	140	44	47.6	52	51316	53316	53316U
	170	68	72.2	78	51416	53416	53416U
85	110	19	—	—	51117		_
	125	31	33.1	37	51217	53217	53217U
	150	49	53.1	58	51317	53317	53317U
	180	72	77	83	51417	53417	53417U
90	120	22			51118
	135	35	38.5	42	51218	53218	53218U
	155	50	54.6	59	51318	53318	53318U
	190	77	81.2	88	51418	53418	53418U
100	135	25	—	—	51120
	150	38	40.9	45	51220	53220	53220U
	170	55	59.2	64	51320	53320	53320U
	210	85	90	98	51420	53420	53420U
110	145	25	—	—	51122	_
	160	38	40.2	45	51222	53222	53222U
	190	63	67.2	72	51322	53322	53322U
	230	95	—	—	51422	—	—
120	155	25	—	—	51124	—	—
120	170	39	40.8	46	51224	53224	53224U
	210	70	74.1	80	51324	53324	53324U
	250	102	—	—	51424	一	—
130	170	30			51126	—	——
	190	45	47.9	53	51226	53226	53226U
	225	75	80.3	86	51326	53326	53326U
	270	110	—	—	51426	—	—
140	180	31			51128		——
	200	46	48.6	55	51228	53228	53228U
	240	80	84.9	92	51328	53328	53328U
	280	112	—	—	51428	—	—
150	190	31	——	——	51130	——
	215	50	53.3	60	51230	53230	53230U
	250	80	83.7	92	51330	53330	53330U
	300	120	—	—	51430	—	—
160	200	31	—	—	51132		—
	225	51	54.7	61	51232	53232	53232U
	270	87	91.7	100	51332	53332	53332U
	320	130	—	—	51432	—	—
170	215	34			51134
	240	55	58.7	65	51234	53234	53234U
	280	87	91.3	100	51334	53334	53334U
	340	135	—	—	51434	—	—
180	225	34			51136
	250	56	58.2	66	51236	53236	53236U
	300	95	99.3	109	51336	53336	53336U
180	360	140	_	_	51436	一	—
190	240	37	_	_	51138
	270	62	65.7	73	51238	53238	53238U
	320	105	111	121	51338	53338	53338U
200	250	37	_	_	51140
	280	62	65.3	74	51240	53240	53240U
	340	110	118.4	130	51340	53340	53340U

Double-direction thrust ball bearings

d	D	T	T3	T5	flat seat face	spherical seat face	aligning seat washer
10	32	22	24.6	28	52202	54202	54202U
15	40	26	27.4	32	52204	54204	54204U
	60	45	49.8	55	52405	54405	54405U
20	47	28	31.4	36	52205	54205	54205U
	52	34	37.6	42	52305	54305	54305U
	70	52	56.2	62	52406	54406	54406U
25	52	29	32.6	37	52206	54206	54206U
	60	38	41.2	46	52306	54306	54306U
	80	59	63	69	52407	54407	54407U
30	62	34	37.8	42	52207	54207	54207U
	68	36	38.6	44	52208	54208	54208U
	68	44	47.2	52	52307	54307	54307U
	78	49	54	59	52308	54308	54308U
	90	65	69.4	77	52408	54408	54408U
35	73	37	39.6	45	52209	54209	54209U
	85	52	56.2	62	52309	54309	54309U
	100	72	78.8	86	52409	54409	54409U
40	78	39	42	47	52210	54210	54210U
	95	58	64.6	70	52310	54310	54310U
	110	78	83.2	92	52410	54410	54410U
45	90	45	49.6	55	52211	54211	54211U
	105	64	72.6	78	52311	54311	54311U
	120	87	92	101	52411	54411	54411U
50	95	46	50	56	52212	54212	54212U
	110	64	70.6	78	52312	54312	54312U
	130	93	99	107	52412	54412	54412U
50	140	101	109.4	119	52413	54413	54413U
55	100	47	50.4	57	52213	54213	54213U
	105	47	50.6	57	52214	54214	54214U
	115	65	71.8	79	52313	54313	54313U
	125	72	80.4	88	52314	54314	54314U
	150	107	114.2	125	52414	54414	54414U
60	110	47	49.6	57	52215	54215	54215U
	135	79	87.2	95	52315	54315	54315U
	160	115	123	135	52415	54415	54415U
65	115	48	51	58	52216	54216	54216U
	140	79	86.2	95	52316	54316	54316U
	170	120	128.4	140	52416	54416	54416U
	180	128	138	150	52417	54417	54417U
70	125	55	59.2	67	52217	54217	54217U
	150	87	95.2	105	52317	54317	54317U
	190	135	143.4	157	52418	54418	54418U
75	135	62	69	76	52218	54218	54218U
	155	88	97.2	106	52318	54318	54318U
80	210	150	160	176	52420	54420	54420U
85	150	67	72.8	81	52220	54220	54220U
	170	97	105.4	115	52320	54320	54320U
90	230	166	—	—	52422	—	—
95	160	67	71.4	81	52222	54222	54222U
	190	110	118.4	128	52322	54322	54322U
	250	177	—	—	52424	—	—
100	170	68	71.6	82	52224	54224	54224U
	210	123	131.2	143	52324	54324	54324U
	270	192	一	一	52426	一	一
110	190	80	85.8	96	52226	54226	54226U
	225	130	一	一	52326	—	—
	280	196	一	一	52428	一	—
120	200	81	86.2	99	52228	54228	54228U
	240	140	一	一	52328	一	—
	300	209	——	—	52430	一	一
130	215	89	95.6	109	52230	54230	54230U
	250	140	一	一	52330	一	—
	320	226	—	—	52432	—	—
135	340	236	—	—	52434	—	—
140	225	90	97.4	110	52232	54232	54232U
	270	153	一	一	52332	—	—
	360	245	—	—	52436	—	—
150	240	97	104.4	117	52234	54234	54234U
	250	98	102.4	118	52236	54236	54236U
	280	153	——	—	52334	—	—
	300	165	—	—	52336	—	—
160	270	109	116.4	131	52238	54238	54238U
	320	183	——	—	52338	—	—
170	280	109	115.6	133	52240	54240	54240U
	340	192	——	—	52340	—	—
190	300	110	115.2	134	52244	54244	54244U

Miniature thrust ball bearings

Bearing No.	Washers Type	Bore Dia (d)	Outer Dia (D)	Height
F2-6	with flat raceway	2	6	3
F2X-7	with flat raceway	2.5	7	3.5
F3-8	with flat raceway	3	8	3.5
F3-8M	with grooved raceway	3	8	3.5
F4-9	with flat raceway	4	9	4
F4-9M	with grooved raceway	4	9	4
F4-10	with flat raceway	4	10	4
F4-10M	with grooved raceway	4	10	4
F5-10M	with grooved raceway	5	10	4
F5-11	with flat raceway	5	11	4.5
F5-11M	with grooved raceway	5	11	4.5
F5-12M	with grooved raceway	5	12	4
F6-12	with flat raceway	6	12	4.5
F6-12M	with grooved raceway	6	12	4.5
F6-13M	with grooved raceway	6	13	5
F6-14M	with grooved raceway	6	14	5
F7-13M	with grooved raceway	7	13	4.5
F7-15	with flat raceway	7	15	5
F7-15M	with grooved raceway	7	15	5
F7-17M	with grooved raceway	7	17	6
F8-16	with flat raceway	8	16	5
F8-16M	with grooved raceway	8	16	5
F8-19M	with grooved raceway	8	19	7
F9-17	with flat raceway	9	17	5
F9-20M	with grooved raceway	9	20	7
F10-18	with flat raceway	10	18	5.5
F10-18M	with grooved raceway	10	18	5.5